Sapphire Stainless Steel Water Chiller Floor Standing - SAP25SS

Outer Casing
Stainless steel

Cooling Coil
Stainless steel

Capacity

30 l /h (based on a 167 ml glass)

180 glasses per hour

Refrigerant Type
R134A

IP Rating
IP23

Installation
Chiller must be positioned
60 – 70mm from the wall
to allow adequate ventilation.
Chilling requires the ambient
temperature to be between
10°C and 45°C.

Plumbing
Must be installed by a suitably
qualified person.

Supplied with all fittings required
including adaptors to facilitate
connection to 15mm copper pipe.
Minimum water pressure 1 bar.
Maximum water pressure 3 bar,
if higher than this a pressure
reducing valve is required.
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1.5m), entry to the
back of the unit.
Maintenance
Sanitise every 3 to 6 months.
Replace filter approximately
every 6 months.
See product instructions for full
maintenance requirements.

Approvals
CE

Standard Warranty
1 year parts or replacement