Speedflow 15L Unvented Water Heater 1.2 kW S Stexel Tank - SF1512SS

Name: Speedflow 15L Unvented Water Heater 1.2 kW S Stexel Tank - SF1512SS
Brand: Hyco
SKU: SF1512SS
Price: 227.52 GBP
Availability: InStock

Ideal for use in cloakrooms and kitchens in offices, shops, student accommodation and domestic premises which have been extended and there is no central hot water system near by. One unit located under the kitchen sink is often used to supply hot water for light dish washing in the kitchen sink and hand washing in the cloakroom basin.

Found it cheaper? Try our price matching service!

We are confident that our prices are the lowest in the business, however if you do find the same product cheaper elsewhere, please let us know and we will be happy to price match.

More Info

Product Code:SF1512SS

£189.60 + VAT

£227.52 inc VAT

Quantity:

Found it cheaper? Try our price matching service!

We are confident that our prices are the lowest in the business, however if you do find the same product cheaper elsewhere, please let us know and we will be happy to price match.

Features

Supplies hot water for up to 3 basins
Can be used with regular taps including mixers
Mains pressure flow rates
2.0 kW element as standard
1.2 kW element available for restricted load applications
Neon element on indicator
Low profile design to fit efficiently under sink
Stainless steel tank
External temperature control with frost protection setting
Accessories may be needed to comply with the Water Regulations. Pressure reducing valve required for pressures above 4.2 bar and expansion vessel and check valve required if cold water draw off nearby. Kits available separately (see Speedflow Kits)
Optional thermostatic mixing valve available (see Thermostatic Mixing Valve)
Not suitable for hair wash basins in hairdressing salons

Technical

Outer Casing
Easy clean, high impact plastic

Heating Element
Stainless steel incoloy

Thermostat
Bulb type adj. to 75°C
E setting approx. 50°C

Water Tank
Stainless steel

Anode
Replaceable grey magnesium (inspect st least annually or more regularly in scale /aggressive water conditions)

Insulation
High density polyurethane foam

Safety
Overheat temperature protection (manual reset).
Supplied pressure relief valve must be fitted in every case (set at 6 bar).
Frost protection if power on.
Optional thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature.

IP Rating
IPX4

Installation
Site above or below the sink, but inlet and outlet must be at the top.

Floor standing or wall mounted.

Plumbing
Must be installed by a suitably qualified person.

It is recommended that flexible hoses are used for connection to facilitate future maintenance.

Access to thermal cut-out to the front of unit.

Minimum water pressure 0.5 bar.
Maximum water pressure 4.2 bar.

Water connection
Inlet/ Outlet 2 x 1/2" BSP male (100mm apart centre to centre).
Fittings required (not supplied): 2 x 15mm compression to 1/2" BSP female adapter.

Electrical Connection
Installation must comply with current IEE regulations.

The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.

Cable pre-wired (1.5m).

Approvals
CE, WRAS

Standard Warranty
3 year tank parts or replacement warranty.
1 year parts or replacement warranty on electrical components.

Data Tables

Product Data

Capacity (litres)	Power (kW)	Heat Up Time (mins)*	Standing Loss (kWh/day)
15	1.2	31	0.71

Product Size

Height (mm)	Width (mm)	Depth (mm)	Weight Empty (kg)	Weight Full (kg)
366	366	327	8	23